Grendel Cage

::----- Cage.txt -----::
***********************************
*Cage.cob for CREATURES (C)*
***********************************

Import this .cob file into CREATURES with the Object Injector. 
The cage will be imported into the garden.  After the light stops 
flashing, the trap is set. When the grendel gets close to it, it will
grab him and lift the cage up into the air.  You can release the
grendel by pushing the down arrow, the trap will reset in a few seconds.
If you wish to disable the trap without removing it, wait until it is
down on the ground, and press the metal ring above the cage.  This will
disembark all passengers and raise the trap into the air.  Pressing
the down arrow again will reset the trap.

Cage.COB uses the following object number:

2 3 100

Quantity: 10 pc.
No Expiration

Cage.RCB is the remover.  It uses no object numbers.

Installation:

Copy the .cob files into your CREATURES main directory, the .spr file
into the CREATURES/IMAGES directory, and the .wav files into the
CREATURES/SOUNDS directory.  Make sure you do all of this, or the cob
will not work!

Also, special thanks to Sandra Linkletter *****@netins.net) for the
Grendel Trap cob (which this is based upon, of course), and for the
.wav files that I "borrowed".
I couldn't have done this without you.

*******************************
eMail: *****@hctc.net
*******************************